Eclipse ERR - O Ring Energized Rotary Piston Seal

Interested in this product?
Request this Product Download PDF

Eclipse Rotary Seal Ring

Full service seal & bearing engineering, manufacturing and distribution.

Address

2540 S Main St., Erie, CO 80516

p: 303-460-1540 / f: 303-635-3005

ErR Piston Series

Contact

[email protected]

www.eclipseseal.com

table of

contents

Full service seal & bearing engineering, manufacturing and distribution.

03 | Rotary Seal Ring introduction

04 | Ordering overview

05 | Standard materials

06 | Standard part numbers

11 | Hardware details

Ordering example:
	ERR2-P-03000-ET010-N

Cross Section Series	ØA Bore H9	ØB Groove h9	Groove Width +0.008/ -0.000	e Clearance (MAX)
Cross Section Series	ØA Bore H9	ØB Groove h9	Groove Width +0.008/ -0.000	1000 psi	3000 psi
ERR0	0.375 – 1.563	ØA + 0.193	0.087	0.010	0.007
ERR1	1.000 – 3.000	ØA + 0.295	0.126	0.015	0.010
ERR2	2.000 – 6.000	ØA + 0.433	0.165	0.020	0.015
ERR3	3.000 – 12.000	ØA + 0.610	0.248	0.023	0.018
ERR4	6.000 – 24.000	ØA + 0.827	0.319	0.025	0.020

Eclipse Material Code	Description	Color	Applications
ET013	Fiberglass / MoS2 filled PTFE	Gray	Standard material for hydraulics
ET020	Carbon Fiber filled PTFE	Black	Abrasive, heavy wear, extended life requirements
ET040	Polyimide / MoS2 filled PTFE	Green	High sealabilty, poor lubrication / water sealing

Eclipse Material Code	Description	Hardness Shore A	Temperature Range
0 or blank	Seal provided without O-Ring	–	–
N	Nitrile (NBR)	70	-30°F to 250°F [-34°C to 121°C]
F	Fluorocarbon (FKM)	75	-15°F to 400°F [-26°C to 205°C]
E	Ethylene Propylene (EPDM)	70	-70°F to 250°F [-57°C to 121°C]

Part Number	Bore Ø +0.002/-0.000	Groove Ø +0.000/-0.002	Groove Width	O-Ring Dash Size
ERR0-P-00375	0.375	0.182	0.087/0.095	2-008
ERR0-P-00394	0.394 (10MM)	0.201		2-008
ERR0-P-00438	0.438	0.245		2-010
ERR0-P-00500	0.500	0.307		2-011
ERR0-P-00563	0.563	0.370		2-012
ERR0-P-00591	0.591 (15MM)	0.398		2-012
ERR0-P-00625	0.625	0.432		2-013
ERR0-P-00688	0.688	0.495		2-014
ERR0-P-00750	0.750	0.557		2-015
ERR0-P-00787	0.787 (20MM)	0.594		2-015
ERR0-P-00813	0.813	0.620		2-016
ERR0-P-00875	0.875	0.682		2-017

Part Number	Bore Ø +0.002/-0.000	Groove Ø +0.000/-0.002	Groove Width	O-Ring Dash Size
ERR0-P-00938	0.938	0.745	0.087/0.095	2-018
ERR0-P-00984	0.984 (25MM)	0.791		2-018
ERR0-P-01000	1.000	0.807		2-019
ERR0-P-01125	1.125	0.932		2-021
ERR0-P-01181	1.181 (30MM)	0.988		2-021
ERR0-P-01250	1.250	1.057		2-023
ERR0-P-01375	1.375	1.182		2-025
ERR0-P-01378	1.378 (35MM)	1.185		2-025

Part Number	Bore Ø +0.002/-0.000	Groove Ø +0.000/-0.002	Groove Width	O-Ring Dash Size
ERR1-P-01500	1.500	1.205	0.126/0.134	2-123
ERR1-P-01563	1.563	1.268		2-124
ERR1-P-01575	1.575 (40MM)	1.280		2-124
ERR1-P-01625	1.625	1.330		2-125
ERR1-P-01688	1.688	1.393		2-126
ERR1-P-01750	1.750	1.455		2-127
ERR1-P-01813	1.813	1.518		2-128
ERR1-P-01875	1.875	1.580		2-129
ERR1-P-01938	1.938	1.643		2-130
ERR1-P-01969	1.969 (50MM)	1.674		2-131
ERR1-P-02000	2.000	1.705		2-131
ERR1-P-02125	2.125	1.830		2-133

Part Number	Bore Ø +0.002/-0.000	Groove Ø +0.000/-0.002	Groove Width	O-Ring Dash Size
ERR1-P-02250	2.250	1.955	0.126/0.134	2-135
ERR1-P-02362	2.362 (60MM)	2.067		2-137
ERR1-P-02375	2.375	2.080		2-137
ERR1-P-02500	2.500	2.205		2-139
ERR1-P-02625	2.625	2.330		2-141
ERR1-P-02750	2.750	2.455		2-143
ERR1-P-02756	2.756 (70MM)	2.461		2-143
ERR1-P-02875	2.875	2.580		2-145

Part Number	Bore Ø +0.003/-0.000	Groove Ø +0.000/-0.003	Groove Width	O-Ring Dash Size
ERR2-P-03000	3.000	2.567	0.165/0.173	2-230
ERR2-P-03125	3.125	2.692		2-231
ERR2-P-03150	3.150 (80MM)	2.717		2-231
ERR2-P-03250	3.250	2.817		2-232
ERR2-P-03375	3.375	2.942		2-233
ERR2-P-03500	3.500	3.067		2-234
ERR2-P-03543	3.543 (90MM)	3.110		2-235
ERR2-P-03625	3.625	3.192		2-235
ERR2-P-03750	3.750	3.317		2-236
ERR2-P-03875	3.875	3.442		2-237
ERR2-P-03973	3.973 (100MM)	3.540		2-238
ERR2-P-04000	4.000	3.567		2-238
ERR2-P-04125	4.125	3.692		2-239
ERR2-P-04250	4.250	3.817		2-240
ERR2-P-04331	4.331 (110MM)	3.898		2-241
ERR2-P-04375	4.375	3.942		2-241

Part Number	Bore Ø +0.003/-0.000	Groove Ø +0.000/-0.003	Groove Width	O-Ring Dash Size
ERR2-P-04500	4.500	4.067	0.165/0.173	2-242
ERR2-P-04625	4.625	4.192		2-243
ERR2-P-04724	4.724 (120MM)	4.291		2-244
ERR2-P-04750	4.750	4.317		2-244
ERR2-P-04875	4.875	4.442		2-245
ERR2-P-05000	5.000	4.567		2-246
ERR2-P-05118	5.118 (130MM)	4.685		2-247
ERR2-P-05125	5.125	4.692		2-247
ERR2-P-05250	5.250	4.817		2-248
ERR2-P-05375	5.375	4.942		2-249
ERR2-P-05500	5.500	5.067		2-250
ERR2-P-05512	5.512 (140MM)	5.079		2-250
ERR2-P-05625	5.625	5.192		2-251
ERR2-P-05750	5.750	5.317		2-252
ERR2-P-05875	5.875	5.442		2-253

Part Number	Bore Ø +0.004/-0.000	Groove Ø +0.000/-0.004	Groove Width	O-Ring Dash Size
ERR3-P-06000	6.000	5.390	0.248/0.256	2-355
ERR3-P-06250	6.250	5.640		2-357
ERR3-P-06299	6.299 (160MM)	5.689		2-358
ERR3-P-06500	6.500	5.890		2-359
ERR3-P-06693	6.693 (170MM)	6.083		2-361
ERR3-P-06750	6.750	6.140		2-361
ERR3-P-07000	7.000	6.390		2-362
ERR3-P-07087	7.087 (180MM)	6.477		2-363
ERR3-P-07250	7.250	6.640		2-363
ERR3-P-07480	7.480 (190MM)	6.870		2-364
ERR3-P-07500	7.500	6.890		2-364
ERR3-P-07750	7.750	7.140		2-365
ERR3-P-07874	7.874 (200MM)	7.264		2-366
ERR3-P-08000	8.000	7.390		2-366
ERR3-P-08250	8.250	7.640		2-367
ERR3-P-08268	8.268 (210MM)	7.658		2-367

Part Number	Bore Ø +0.004/-0.000	Groove Ø +0.000/-0.004	Groove Width	O-Ring Dash Size
ERR3-P-08500	8.500	7.890	0.248/0.256	2-368
ERR3-P-08661	8.661 (220MM)	8.051		2-369
ERR3-P-08750	8.750	8.140		2-369
ERR3-P-09000	9.000	8.390		2-370
ERR3-P-09250	9.250	8.640		2-371
ERR3-P-09252	9.252 (235MM)	8.642		2-371
ERR3-P-09500	9.500	8.890		2-372
ERR3-P-09750	9.750	9.140		2-373
ERR3-P-09843	9.843 (250MM)	9.233		2-374
ERR3-P-10000	10.000	9.390		2-374
ERR3-P-10433	10.433 (265MM)	9.823		2-376
ERR3-P-10500	10.500	9.890		2-376
ERR3-P-11000	11.000	10.390		2-377
ERR3-P-11024	11.024 (280MM)	10.414		2-377
ERR3-P-11500	11.500	10.890		2-378

Part Number	Bore Ø +0.006/-0.000	Groove Ø +0.000/-0.006	Groove Width	O-Ring Dash Size
ERR4-P-12000	12.000	11.173	0.319/0.327	2-451
ERR4-P-12500	12.500	11.673		2-452
ERR4-P-13000	13.000	12.173		4-453
ERR4-P-13500	13.500	12.673		2-454
ERR4-P-13780	13.780 (350MM)	12.953		2-455
ERR4-P-14000	14.000	13.173		2-455
ERR4-P-14500	14.500	13.673		2-456
ERR4-P-14764	14.764 (375MM)	13.937		2-457
ERR4-P-15000	15.000	14.173		2-457
ERR4-P-15500	15.500	14.673		2-458
ERR4-P-15748	15.748 (400MM)	14.921		2-458
ERR4-P-16000	16.000	15.173		2-459
ERR4-P-16500	16.500	15.673		2-460
ERR4-P-16732	16.732 (425MM)	15.905		2-460
ERR4-P-17000	17.000	16.173		2-461

Part Number	Bore Ø +0.006/-0.000	Groove Ø +0.000/-0.006	Groove Width	O-Ring Dash Size
ERR4-P-17500	17.500	16.673	0.319/0.327	2-462
ERR4-P-17717	17.717 (450MM)	16.890		2-462
ERR4-P-18000	18.000	17.173		2-463
ERR4-P-18500	18.500	17.673		2-464
ERR4-P-19000	19.000	18.173		2-465
ERR4-P-19500	19.500	18.673		2-466
ERR4-P-19685	19.685 (500MM)	18.858		2-466
ERR4-P-20000	20.000	19.173		2-467

We started Eclipse with the premise that if we could solve enough of our customers problems they would continue to come back to us for solutions regardless of the type of products we offered.

Eclipse has evolved to produce standard product offerings for a wide range of industries including Hydraulics, Pneumatics, Energy Production, Aerospace as well as Pharmaceutical and Food Handling. Instituting ISO9001/AS9100 quality system in 2015 allowed Eclipse to become a top tier supplier.

Today, Eclipse can support our smaller customers that require only a few seals a year to those needing in the 100’s of thousands. We continue to retain a quality product and are able to deliver consistently on time. Our customers continue to bring us challenging projects that allow our team to do what we do best, problem solving.

Address

2540 S Main St., Erie, CO 80516

p: 303-460-1540 / f: 303-635-3005

Contact

[email protected]

www.eclipseseal.com

Eclipse Engineering

Full service seal & bearing engineering, manufacturing and distribution.

Eclipse ERR – Rotary Piston Seal

ERR Rotary Piston seals are bi-directional, elastomer energized seals for low to medium speed rotary or oscillating applications. Advantages include long wear life, low friction, and simple groove design. Standard ERR seals are etched and coated with a friction promoter at the O-Ring/Seal mating surface. The ERR profile will retrofit non-Eclipse seals designed for similar hardware.

Typical Range of Application

Pressure	Temperature*	Surface Velocity	Media
4,500 psi [300 bar] MAX	-30°F to 250°F [-34°C to 121°C]	390 fpm [2 m/s] MAX	Hydraulic/Mineral Oil, Brake Fluid, Gases, Water

*Limited by O-Ring compound
				Values and ratings in this catalog are based on industry standard applications operating under ideal conditions. The customer should assume responsiblity for validation testing of performance and suitabilty of Eclipse Engineering products. Eclipse Engineering accepts no liabilty for the accuracy and applicabilty of provided information.

What Can We Help You With?